Fusion machine (Fusion Sample Preparation Machine)

Sample preparation Machine;Preparing Sample for XRF analysis sby induction fusion. PLC controlled and touch-screen interface Glass disks for XRF analysis Solutions for AA and ICP analysis

 Processes involved:

Cement, lime, carbonates, ceramics, glass, slag Mining, geological, silica, silicates, clay and ores Sulfides, fluorides Bauxites, alumina Catalysts, polymers, pigments Steel, pure metals, ferroalloys, non-ferrous alloys Pharmaceutical samples

Sample preparation is the main error source for XRF measurement. With high temperature, the fusion machine can fuse samples into even glass slide. It can reduce the sample error arisen from mineral effect, particle effect and unevenness. Fusion system has been widely used as a necessary device for XRF sample preparation. High-frequency induction fusion system has some features, like good repeatability, high precision, short sample preparation time, low cost and so on. It has been widely used in iron & steel, metallurgical, cement, inspection, chemical and other industries.

Model:

    K2F

    K2F+

    K4F

    K4F+

    K8F

Features:

    •Quick sample preparation, 6-10 minutes for every sample preparation including cooling time.

     • Moulding method to lower crucible cost.

      •Manual or automatic moulding can be selected by customers.

      •Automatic moulding can decrease interference.

      •Shaking and pouring can let sample mix completely.

      •Applying PLC controller with life more than 100000 hours.

      •Touch-screen is easy for operation.

      •Safe operation with exhaust system.

      •Without preheating or keeping temperature.

      •Real-time infrared temperature measurement.

     •NO calibration, NO gas, NO oxygen and NO compressed air

Sample treatment:

    Oxide

    Cement, carbonate, silicate, ceramics, furnace blast, glass, sand

    Geological samples

    Sulfide

    Bauxite, fluoride

    Catalyst

    Pure metal, ferroalloys and other alloys

Indicators:

Model	Sample No.	Moulding mode	Dimensions (mm)	Power	Weight
K2F	1	Manual- moulding mode Single-crucible & single-mould	660X700X530	4KW	40Kg
K2F+	1	Automatic- moulding mode Single-crucible & single-mould	660X700X530	4KW	40Kg
K4F	2	Manual- moulding mode Double-crucible & double-mould	660X700X530	6KW	40Kg
K4F+	4	Automatic- moulding mode Double-crucible & double-mould	780X760X580	6KW	60Kg
K8F	4	Automatic- crucible bottom moulding	780X760X580	4KW	60Kg

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v0/275916143_1/Fusion_machine_Fusion_Sample_Preparation_Machine_.jpg' , 'http://i01.i.aliimg.com/photo/v0/275916143_2/Fusion_machine_Fusion_Sample_Preparation_Machine_.jpg' , 'http://i01.i.aliimg.com/photo/v0/275916143_3/Fusion_machine_Fusion_Sample_Preparation_Machine_.jpg' , 'http://i01.i.aliimg.com/photo/v0/275916143_4/Fusion_machine_Fusion_Sample_Preparation_Machine_.jpg' , 'http://i01.i.aliimg.com/photo/v0/275916143_5/Fusion_machine_Fusion_Sample_Preparation_Machine_.jpg' , 'http://i01.i.aliimg.com/photo/v0/275916143_6/Fusion_machine_Fusion_Sample_Preparation_Machine_.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Fusion machine (Fusion Sample Preparation Machine)